Bolt

Accordian Screws

For easy installation of metal and plywood panels to wood, hollow block, and concrete.

 

Collated Screws

2

 

Used in conjunction with a collated screw gun to drive the screw well into a hard surface, it’s used in drywall installation, building furniture, decks, steps, and frames.

 

Dowel Screws

3

 

Dowel screws, also known as lag screws, are heavy duty screws designed for metal-to-wood applications. They have a square or hexagonal head that can be used with standard wrench and pliers. Available in many sizes for many applications.

Drive Screws

4

 

A thread forming screw with high helix thread for driving or hammering into sheet metals, castings, fiber or plastics for permanent, quick assemblies. Requires a pre-drilled or punched hole.

Drywall Screws

5

 

Sharp point makes it ideal for attaching drywall to wood studs or metal studs.

Eye Screws

6

 

Curved into a loop at one end and durable threading at the other end, an eye screw allows the shaft to hold securely while the eye anchor allows for many applications.

Flooring Screws

7

 

Floorboard Screws are specifically designed for installing wood floors in truck trailers. These screws have a countersuck six-lobe drive, cut their own threads, a blunt point ending in tapered threads, and multiple cutting edges.

Lag Screws

8

 

Hex lag screws, also called lag bolts, are used in wood construction.

Machine Screws

9

 

A straight shank fastener designed to bind metal to metal by going through a hole or opening that is pre-tapped to form the same thread configuration as the threads of the machine screw. Machine screws have threads along the entire length of the shaft, much like their bigger brother, the tap bolt. Popular in electronic applications.

Self-Drilling Screws

10

 

Self-drilling screws, also known as Tek screws, eliminate the need for a pre-drilled hole and allow drilling and fastening to be done in the same motion.

SEMS Screws

11

 

SEMS screws combine two separate parts into one pre-assembled, low cost fastener. With washers under the head, SEMS screws are fast, permanent, and easily adaptable to many applications.

Sheet Metal Screws

12

 

Flat Head Sheet Metal Screw Type A, Zinc

Thread Cutting Screws

13

 

Designed with a blunt tapered point and multi-cutting edges, thread cutting screws are used in applications ranging from heavy gauge sheet metal to plastic fastening.

Thread Rolling Screws

14

 

Thread rolling screws are designed for reliable and secure fastening into materials such as plastic

Thumb Screws

15

 

Used in applications where a fastener is frequently adjusted with easy-grip textured head that allows adjusting and installation to be done simply by hand.

Wing Screws

16

 

Wing-like projections from the head of the screw, ideal for thumb and forefinger leverage in turning. Ensures rapid assembly and disassembly using only your hand.

Wood Screws

17

 

Designed specifially for fastening wood to wood, with threads that give the greatest drilling and holding power when screwing into wood. Wood screws come in many head styles to meet the needs of different applications.

Bearing for Industry

MTK+ Bearings are used in many applications in a wide range of industries such as general engineering, general machinery, crane industry, steel industry, offshore industry, food industry, agriculture and mining as well as in the replacement market. You can find a full list of the application area’s and key industries below.


General Machinery

Crane Industry

Paper Mill Industry

Mining Industry

Agricultural Industry

Marine Industry

Steel Industry

Price : Call

Dock Seal/Shelter Combinations

For use with an 8’W x 10’H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off. Header measures 114″W with a 30″ drop curtain. Side (verticals) measure 120″ tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12″W and will taper to 9-1⁄2″ at wall. Verticals are mounted on wooden 2″ x 12″ to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge-O-Dock use a 20″ projection Dock Seal. Units are non-returnable.

Price : Call

Water Pump-WL20XN – HONDA GP160H

Specifications
Pump
Type Self priming, centrifugal pump
Suction aperture 50 mm ( 2 Inch )
Discharge aperture 50 mm ( 2 Inch )
Total head lift (Max.) 32 m
Suction head lift (Max.) 7.5 m
Maximum discharge capacity 670 l/min
Self feed time 110 sec./ 5 m
Dimensions
Length (mm) 490 mm
Width 385 mm
Height 410 mm
Dry Weight 24 kg
Engine
Model Name GP160H
Engine type 4-stroke, overhead valve single cylinder, inclined by 250
Displacement 163 cm3
Bore and Stroke 68.0 x 45.0 mm
Compression ratio 8.5 :0.3
Net Power (SAE J1349)* 3.6kW (4.8 HP)/3600 min-1 rpm
Max. Net Torque (SAE J1349)* 10.3 N.m (1.05 kgf.m, 7.6 lbf.ft)/2500 min-1 rpm
Fuel consumption 1.4 l/h
Fuel tank capacity 3.1 l
Fuel used Unleaded Gasoline (Oktan 86 or higher)
Oil capacity 0.58 l
Air cleaner Semi dry type

Encoder Seals

Efficient engine control by sealing technology

By combining the original Simmerring® radial shaft seal with an elastomer encoder to measure speed and rotation angle, our mother group Freudenberg has developed an innovative sealing solution: With the help of an integrated sensor the seal is able to measure speed precisely and therefore contributes to more efficiency in motor control. This new principle has proven itself many times in the original equipment sector.

Alat Teknik Umum

RUBBER ROLL FOR RICE HULLER

1

 

Specification:     Hardness: 92 – 96 Shore A   Capacity: more than 75 tons paddy (input) for size 6″ x 8.75Broken Rice:less than 5%   Colour : Red Brown   Weight: 6Kg

HYDRAULIC CRIMPING TOOL

2

 

Specification:
Force developed 130 kN
Length 473 mm
Width 144 mm
Weight 5.5 kg
Opening of the head 25 mm
Nominal pressure 700 bar
Type of action Crimp
MAIN APPLICATIONS – max section mm2
L.V. lugs and splices 400
Insulated terminals 240
“C” sleeve connectors 185
H.V. lugs  and splices 400

LC Flow meter

3

 

MA15-SERIES POSITIVE DISPLACEMENT FLOW METERS
MA7-SERIES POSITIVE DISPLACEMENT FLOW METERS
MA5-SERIES POSITIVE DISPLACEMENT FLOW METERS
MA4-SERIES POSITIVE DISPLACEMENT FLOW METERS
M80-SERIES POSITIVE DISPLACEMENT FLOW METERS
M60-SERIES POSITIVE DISPLACEMENT FLOW METERS
M40-SERIES POSITIVE DISPLACEMENT FLOW METERS
M30-SERIES POSITIVE DISPLACEMENT FLOW METERS

Contactor Siemens Magnetic

Spesifikasi produk contactor siemens magnetic :

Contactor merk Siemens dengan tipe 3tf40 2no+2nc dan berbagai tipe lainnya
sebuah kontaktor terdiri dari koil, beberapa kontak normally open ( no ) dan beberapa normally close ( nc ). Pada saat satu kontaktor normal, no akan membuka dan pada saat kontaktor bekerja, no akan menutup. Sedangkan kontak nc sebaliknya yaitu ketika dalam keadaan normal kontak nc akan menutup dan dalam keadaan bekerja kontak nc akan membuka. Koil adalah lilitan yang apabila diberi tegangan akan terjadi magnetisasi dan menarik kontak-kontaknya sehingga terjadi perubahan atau bekerja. Kontaktor yang dioperasikan secara elektromagnetis adalah salah satu mekanisme yang paling bermanfaat yang pernah dirancang untuk penutupan dan pembukaan rangkaian listrik.

Harga : Call

Grey Water Sink Pump

If you are a plumber and want to be a step ahead of your peers, then you need to read why you should become a Pump Factory preferred sanisplit installer

  • PLUMBERS BEWARE!! Don’t install an undersized pump which may need to be replaced because it cannot cope
  • COMPARE COMPARE COMPARE!! 1,000 Watt Motor, Patent Split System, 11m head, 350 LPM Flow, Multi-Purpose
  • PLUMBERS BEST MATE! We take your bathroom to new heights (11m max)
  • WARNING!! Not all pumps are the same. Don’t install another pump until you read!

Price : Call